Declaration of Conformity

English
273
• The Scan menu shows Turn Off if scan is
enabled.
• The display shows Scan Off if scan is disabled.
• The Scan menu shows Turn On if scan is
disabled.
6.3.5.2
Responding to a Transmission During
a Scan
During scanning, your radio stops on a group where activity
is detected. The radio continuously listens for any member
in the scan list when idle on the control channel.
1 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
2 Press the PTT button during hang time.
The LED lights up solid green.
3 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
4 Release the PTT button to listen.
If you do not respond within the hang time, the radio
returns to scanning other groups.
6.3.6
User Configurable Scan
If the Edit List menu is enabled, a user is able to Add and
Remove the scan members from the Add Member menu.
A Scan List member must be a regular Group Contact
(for example, not Multi-group or Site All Call/Network Wide
All Call) that is currently assigned to a Channel Selector
position in a Connect Plus Zone with the same Network ID
as the currently selected Zone. The Talkgroup alias must
not match any Talkgroup that has been included in the
current Zone Scan List.
Scan can be turned on or off from the menu or by pressing
a programmed Scan On/Off button.
This feature functions only when the radio is not currently
involved in a call. If you are presently listening to a
call, your radio cannot scan for other group calls, and is
therefore unaware they are in progress. Once your call is
finished, your radio returns to the control channel time slot
and is able to scan for groups that are in the scan list.