Declaration of Conformity

English
272
2 Wait for acknowledgment.
If successful, a positive indicator tone sounds
and the display momentarily shows Rem. Monitor
Successful. Your radio starts playing audio from
the monitored radio for a programmed duration and
display shows Rem. Monitor, followed by target
alias. Once the timer expires, the radio sounds an
alert tone and the LED turns off.
If unsuccessful, the radio sounds a negative
indicator tone the display shows Rem. Monitor
Failed.
Starting and Stopping Scan
NOTE:
This procedure turns the Scan feature On or Off for
all Connect Plus zones with the same Network ID as
your currently selected zone. It is important to note
that even when the Scan feature is turned on via
this procedure, scan may still be disabled for some
(or all) groups on your scan list. See
Editing the
Scan List on page 274
for more information.
You can start and stop scanning by pressing the
programmed Scan button OR follow the procedure
described next.
6.3.5
Scan
This feature allows your radio to monitor and join calls for
groups defined in a pre-programmed scan list. When scan
is enabled, the scan icon appears on the status bar and the
LED blinks yellow when idle.
6.3.5.1
1
Press to access the menu.
2
Press or to Scan and press to select.
3
Press or to Turn On or Turn Off and press
to select.
• The display shows Scan On if scan is enabled.