Declaration of Conformity

English
259
When the target radio responds, the LED blinks
green.
If there is no voice activity for a predetermined
period of time, the call ends. You hear a short tone.
3 Press the PTT button to make the call.
The LED lights up solid green. The Group Call icon
appears in the top right corner. The first text line
shows Site All Call.
The display shows Call Ended.
Your radio may be programmed to perform a radio
presence check prior to setting up the Private Call. If the
target radio is not available, you hear a short tone and see
negative mini notice on the display.
6.2.6.1.3
Making a Site All Call
This feature allows you to transmit to all users on the site
that are currently not engaged in another call. Your radio
must be programmed to allow you to use this feature.
Users on the channel/site cannot respond to an Site All
Call.
1 Select the channel with the active Site All Call group
alias. See
Selecting a Call Type on page 252.
2 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm)
from your mouth.
4 Wait for the Talk Permit Tone to finish (if enabled),
and speak clearly into the microphone.
6.2.6.1.4
Making a Multi-group Call
This feature allows you to transmit to all users on multiple
groups. Your radio must be programmed to allow you to
use this feature.
NOTE:
Users on the groups cannot respond to a Multi-
group Call.
1 Turn the Channel Selector Knob to select the Multi-
group alias or ID.
2 Press the PTT button to make the call.
The LED lights up solid green. The display shows
the Multi-group alias or ID.