Manualshelf

Declaration of Conformity

ManualsBrandsMotorola Solutions ManualsElectronics2-Way Portable Radio
251252253254255256257258259260
Table Of Contents
English
252
6.2.4
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Multi-group Call, Site All Call or
Private Call, depending on how your radio is programmed.
If you change the Channel Selector Knob to a different
position (that has a call type assigned to it), this causes
the radio to re-register with the Connect Plus site. The
radio registers with the Registration Group ID that has been
programmed for the new Channel Selector Knob position
call type.
If you select a position that has no call type assigned to it,
your radio sounds a continuous tone and the display shows
Unprogrammed. Your radio does not operate when selected
to an unprogrammed channel, use the Channel Selector
6.2.5
Once the required zone is displayed (if you have
multiple zones in your radio), turn the programmed
Channel Selector Knob to select the call type.
Knob to select a programmed channel instead.
Receiving and Responding to a
Radio Call
Once the channel, subscriber ID or call type is displayed,
you can proceed to receive and respond to calls.