Declaration of Conformity

English
249
Momentary Tone Sounds only once for a
short period of time de-
fined by the radio.
6.1.4
Switching Between Connect Plus
and Non-Connect Plus Modes
To switch to a non-Connect Plus mode, you must
change to another zone, if programmed by your dealer or
system administrator. Check with your dealer or system
administrator to see if your radio has been programmed
with non-Connect Plus zones, and what features are
available while operating in non-Connect Plus zones.
6.2
Making and Receiving Calls
in Connect Plus Mode
This section explains general radio operations and call
features that are available in your radio.
6.2.1
Selecting a Site
A site provides coverage for a specific area. A Connect
Plus site has a site controller and a maximum of 15
repeaters. In a multi-site network, the Connect Plus radio
will automatically search for a new site when the signal
level from the current site drops to an unacceptable level.
6.2.1.1
Roam Request
A Roam Request tells the radio to search for a different
site, even if the signal from the current site is acceptable.
If there are no sites available:
• The radio displays Searching and Selected Channel
Alias and continues to search through the list of sites.