Declaration of Conformity

English
238
Connect Plus
Connect Plus is a full trunking solution based on DMR
technology. Connect Plus uses a dedicated control channel
for channel requests and allocations.
6.1
Additional Radio Controls in
Connect Plus Mode
This chapter explains the additional radio controls available
to the radio user through preprogrammed means such as
programmable buttons and assignable radio functions.
6.1.1
Push-To-Talk (PTT) Button
The PTT button on the side of the radio serves two basic
purposes:
• While a call is in progress, the PTT button allows the
radio to transmit to other radios in the call.
Press and hold the PTT button to talk. Release the PTT
button to listen.
The microphone is activated when the PTT button is
pressed.
• While a call is not in progress, the PTT button is used
to make a new call (see
Making a Radio Call on page
256
).
If the Talk Permit Tone (see
Turning the Talk Permit Tone
On or Off on page 350
) is enabled, wait until the short alert
tone ends before talking.
6.1.2
Programmable Buttons
Your dealer can program the programmable buttons as
shortcuts to radio functions depending on the duration of
a button press:
Short press
Pressing and releasing rapidly.