Declaration of Conformity

English
209
5.7.32.4
Connecting to a Network Access Point
When you turn on Wi-Fi, the radio scans and connects to a
network access point.
NOTE:
You can also connect to a network access point
using the menu.
The WPA-Enterprise Wi-Fi network access points
are pre-configured. Check with your dealer or
system administrator to determine how your radio
has been programmed.
1
Press to access the menu.
2
Press or to WiFi and press to select.
3
Press or to Networks and press to
select.
NOTE:
For WPA-Enterprise Wi-Fi, if a network
access point is not preconfigured, the
Connect option is not available.
5
Press or to Connect and press to
select.
6 For WPA-Personal Wi-Fi, enter the password and
press .
7 For WPA-Enterprise Wi-Fi, password is configured
by using RM.
If the preconfigured password is correct, your radio
automatically connects to the selected network
access point.
If the preconfigured password is incorrect, the
display shows Authentication Failure, and
automatically returns to the previous menu.
4
Press or to a network access point and
press to select.
If the connection is successful, the radio displays a notice
and the network access point is saved into the profile list.