Declaration of Conformity

English
204
• You can select Restart Now or Postpone. When you
select Postpone, your radio returns to the previous
screen. The display shows the OTAP Delay Timer icon
until the automatic restart occurs.
When your radio powers up after automatic restart:
• If successful, the display shows Sw Update
Completed.
• If the program update is unsuccessful, a tone sounds,
The display shows the RSSI icon at the top right corner.
See Display Icons for more information on the RSSI icon.
5.7.30.1
Viewing RSSI Values
At the home screen, press three times and
immediately press , all in 5 seconds.
the red LED blinks once, and the display shows Sw
Update Failed.
NOTE:
If the programming update is unsuccessful, the
software update failure indications appear every
time you turn on your radio. Contact your dealer
to reprogram your radio with the latest software to
eliminate the software update failure indications.
See
Checking Software Update Information on page 235
for the updated software version.
5.7.30
Received Signal Strength Indicator
This feature allows you to view the Received Signal
Strength Indicator (RSSI) values.
The display shows the current RSSI values.
To return to the home screen, press and hold .
5.7.31
Front Panel Programming
You are able to customize certain feature parameters in
Front Panel Programming (FPP) to enhance the use of
your radio.
The following buttons are used as required while navigating
through the feature parameters.
Up/Down Navigation Button
Press to navigate through options horizontally or
vertically, or increase or decrease values.