Declaration of Conformity

English
188
1 Do one of the following:
• Press the programmed One Touch Access
button. Skip the following steps.
• Press to access the menu.
2
Press or to Status. Press to select.
3
• The display shows a positive mini notice momentarily
before returning to the Quick Status screen.
• The display shows beside the sent status message.
If unsuccessful:
• A negative indicator tone sounds.
• The LED turns off.
• The display shows the failure notice momentarily before
returning to the Quick Status screen.
Press or to Quick Status. Press to
select.
4
Press or to the required status message.
Press to select.
5
Press or to the required subscriber alias or
ID, or group alias or ID. Press to select.
If successful:
• A positive indicator tone sounds.
• The LED turns off.
5.7.23.1.2
Sending Status Message by Using
Programmable Button
Follow the procedure to send a status message by using
the programmable button.
1 Press the programmed Status Message button.
2 Press or to the required status message.
Press to select. The contact list is displayed.