Manualshelf

Declaration of Conformity

ManualsBrandsMotorola Solutions ManualsElectronics2-Way Portable Radio
161162163164165166167168169170
Table Of Contents
English
167
button to transmit non-emergency voice to the same
group the Emergency Alarm targeted.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
When the emergency initiating radio responds:
• The red LED blinks.
• The display shows the Emergency Call icon, the
Emergency Talkgroup ID or alias, and the ID or
alias of the transmitting radio.
NOTE:
If the Emergency Call Indication is not
enabled, the display shows the Group Call
icon, Emergency Talkgroup ID or alias, and
the ID or alias of the transmitting radio.
5.7.20.6
Responding to Emergency Alarms with
Call
Follow the procedure to respond to Emergency Alarms with
Call on your radio.
When you receive an Emergency Call:
• The Emergency Call Tone sounds if the Emergency Call
Indication and Emergency Call Decode Tone is enabled.
The Emergency Call Tone will not sound if only the
Emergency Call Indication is enabled.
• The display shows the Emergency Call icon at the top
right corner.
• The text line shows the Emergency Talkgroup ID or
alias, and the ID or alias of the transmitting radio.
• Your radio unmutes and the incoming call sounds
through the speaker.
1 If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating