Declaration of Conformity

English
165
If the Emergency Alarm request fails, the radio does not
retry to send the request, and enters the hot mic state
directly.
NOTE:
Some accessories may not support hot mic. Check
with your dealer or system administrator for more
information.
Follow the procedure to send Emergency Alarms with voice
to follow on your radio.
1 Press the programmed Emergency On button.
You see one of these results:
• The display shows Tx Alarm and the destination
alias.
• The display shows Tx Telegram and the
destination alias.
The green LED lights up. The Emergency icon
appears.
2 Once the display shows Alarm Sent, speak clearly
into the microphone.
The radio automatically stops transmitting when:
• The cycling duration between hot mic and
receiving calls expires, if Emergency Cycle Mode
is enabled.
• The hot mic duration expires, if Emergency Cycle
Mode is disabled.
3 Press the Emergency Off button to exit the
Emergency mode.
The radio returns to the Home screen.
5.7.20.4
Receiving Emergency Alarms
The receiving radio can only support a single Emergency
Alarm at a time. If initiated, a second Emergency Alarm will
override the first alarm. Follow the procedure to receive and
view Emergency Alarms on your radio.
When you receive an Emergency Alarm:
• A tone sounds.
• The red LED blinks.