Declaration of Conformity

English
108
5
Enter the telephone number, and press to
proceed.
The display shows Access Code: and a blinking
cursor if the access code was not preconfigured.
6
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
The green LED lights up. The display shows the
Phone Call icon, subscriber alias, and call status.
If the call is successful:
• The DTMF Tone sounds.
• You hear the call waiting tone of the telephone
user.
• The display shows subscriber alias and the
Phone Call icon.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then, Access Code:.
• Your radio returns to the screen you were on
before initiating the call if the access code has
been preconfigured in the Contacts list.
7 Press the PTT button to respond to the call.
8 Release the PTT button to listen.
9 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra
digits requested by the call, your radio returns to the
screen you were on before initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
10
Press to end the call.
11 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows