Declaration of Conformity

English
103
• The display shows Phone Call icon, subscriber
alias or ID, Phone Call, and call status.
If call-setup is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed.
• Your radio returns to the Access Code input
screen. If the access code was preconfigured in
the Contacts list, the radio returns to the screen
you were on prior to initiating the call.
3 Press the PTT button to talk. Release the PTT
button to listen.
4 To enter extra digits, if requested by the Phone Call.
Do one of the following:
• Press any keypad key to begin the input of the
extra digits. The display shows Extra Digits:
and a blinking cursor. Enter the extra digits and
press the button to proceed. The DTMF
tone sounds and the radio returns to the previous
screen.
• Press One Touch Access button. The DTMF
tone sounds. If the entry for the One Touch
Access button is empty, a negative indicator tone
sounds.
5
Press to end the call.
If deaccess code was not preconfigured in the
Contacts list, the display shows De-Access Code:.
Enter the deaccess code and press the button
to proceed.
The DTMF tone sounds and the display shows
Ending Phone Call.
If the end-call-setup is successful, a tone sounds
and the display shows Call Ended.
If the end-call-setup is unsuccessful, your radio
returns to the Phone Call screen. Repeat
step 3 and
step 5 or wait for the telephone user to end the call.
When you press PTT button while in the Phone
Contacts screen, a tone sounds and the display
shows Press OK to Place Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.