Declaration of Conformity

English
102
9 Do one of the following:
• If the deaccess code was not preconfigured,
enter the deaccess code when the display shows
De-Access Code:, and press to proceed.
The radio returns to the previous screen.
• Press the programmed One Touch Access
button. If the entry for the One Touch Access
button is empty, a negative indicator tone sounds.
The DTMF Tone sounds and the display shows
Ending Phone Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat the last two steps or wait for the
telephone user to end the call.
5.6.5.2
Making Phone Calls with the
Programmable Button
Follow the procedure to make Phone Calls with the
programmable button.
1 Press the programmed Phone button to enter into
the Phone Entry list.
2 Press or to the required alias or ID. Press
to select.
If the access code was not preconfigured in the
Contacts list, the display shows Access Code:.
Enter the access code and press the button to
proceed.
The green LED lights up. The display shows Phone
Call icon, subscriber alias or ID, and call status.
If the call-setup is successful:
• The DTMF tone sounds.
• You hear the call waiting tone of the telephone
user.