Declaration of Conformity

English
101
When you press the PTT button while on the Phone
Contacts screen:
• A negative indicator tone sounds.
• The display shows Press OK to Place Phone
Call.
The display shows Access Code: if the access code
was not preconfigured.
3
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
4 Press the PTT button to make the call.
The green LED lights up. The display shows Phone
Call icon, subscriber alias, and call status.
If the call is successful:
• The DTMF Tone sounds.
• You hear the call waiting tone of the telephone
user.
• The display shows the subscriber alias and the
Phone Call icon.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then, Access Code:.
• If the access code has been preconfigured in the
Contacts list, your radio returns to the screen you
were on before initiating the call.
5 Press the PTT button to respond to the call.
6 Release the PTT button to listen.
7 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra
digits requested by the call, your radio returns to the
screen you were on before initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
8
Press to end the call.