Declaration of Conformity

English
100
• Your radio unmutes and the incoming call sounds
through the speaker.
The radio returns to the screen before receiving the All Call
when the call ends.
If the Channel Free Indication feature is enabled, you hear
a short alert tone when the transmitting radio releases the
PTT button, indicating the channel is free for you to use.
You cannot respond to an All Call.
NOTE:
The radio stops receiving the All Call if you switch
to a different channel while receiving the call. You
are not able to continue with any menu navigation or
editing until the call ends during an All Call.
5.6.5
Phone Calls
A Phone Call is a call in between an individual radio or a
group of radios and a telephone.
Depending on how the radio is configured, the following
features may or may not be made available:
• Access code
• Dual Tone Multi Frequency (DTMF) tone
• De-access code
• Displaying of caller alias or ID on receiving a phone call
• Ability to reject or accept a phone call
The Phone Call capability can be enabled by assigning and
setting up phone numbers on the system. Check with your
system administrator to determine how your radio has been
programmed.
5.6.5.1
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Do one of the following:
• Press the programmed Phone button to enter
into the Phone Entry list.
• Press the programmed One Touch Access
button. Proceed to
step 2.
2 Press or to the required alias or ID.Press
to select.