User's Guide

2 Wait for acknowledgment.
If the Call Alert acknowledgment is received, two
chirps sound.
If the Call Alert acknowledgement is not received, a
low pitch tone sounds.
7.7.2
Responding to Call Alerts
When you receive a Call Alert:
• A repetitive tone sounds.
•
The yellow LED blinks.
Press the PTT button within 4 seconds of receiving a
Call Alert page to respond with a Private Call.
7.8
Privacy
This feature helps to prevent eavesdropping by
unauthorized users on a channel by the use of a
software-based scrambling solution. The signaling and user
identification portions of a transmission are not scrambled.
Your radio must have privacy enabled on the channel to
send a privacy-enabled transmission, although this is not a
necessary requirement for receiving a transmission. While
on a privacy-enabled channel, the radio is still able to
receive clear or unscrambled transmissions.
Some radio models may not offer Privacy feature, or may
have a different configuration. Check with your dealer or
system administrator for more information.
Your radio only supports Basic Privacy.
To unscramble a privacy-enabled call or data transmission,
your radio must be programmed to have the same Privacy
Key as the transmitting radio. If your radio receives a
scrambled call that is of a different Privacy Key, you hear a
garbled transmission.
The green LED lights up when the radio is transmitting,
and blinks rapidly when the radio is receiving an ongoing
privacy-enabled transmission.
7.8.1
Turning Privacy On or Off
Follow the procedure to turn privacy on or off on your radio.
Press the programmed Privacy button.
English
42