User's Guide

Calls
This chapter explains the operations to receive, respond to,
make, and stop calls.
You can select a subscriber alias or ID, or group alias or
ID after you have selected a channel by using one of these
features:
Programmed One Touch Access Button
This method is used for Group and Private Calls only.
You can only have one ID assigned to a One Touch
Access button with a short or long programmable
button press. Your radio can have multiple One Touch
Access buttons programmed.
Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key as your
radio will be able to unscramble the transmission. See
Privacy on page
42.
Volume/Channel Selector Knob
This method manually selects a subscriber alias or ID,
or group alias or ID.
6.1
Group Calls
Your radio must be configured as part of a group to receive
a call from or make a call to the group of users.
6.1.1
Making Group Calls
Follow the procedure to make Group Calls on your radio.
1 Do one of the following:
• Select a channel with the active group alias or ID.
•
Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
English
29