User's Guide
Table Of Contents
- English
- Contents
- Supplier's Declaration of Conformity
- Important Safety Information
- Notice to Users (FCC)
- Notice to Users (Industry Canada)
- Software Version
- Intellectual Property and Regulatory Notices
- Computer Software Copyrights
- Radio Care
- Introduction
- Getting Started
- Radio Controls
- Status Indicators
- Channel Selections
- Calls
- Advanced Features
- Utilities
- Authorized Accessories List
- Batteries Warranty
- Limited Warranty
Voice Operating Transmission (VOX)
Toggles VOX on or off.
3.1.2
Assignable Settings or Utility
Functions
The following radio settings or utility functions can be
assigned to the programmable buttons.
Tones/Alerts
Toggles all tones and alerts on or off.
Analog Scrambling Codes
Toggles scrambling codes between 3.29 kHz and 3.39
kHz.
Power Level
Toggles transmit power level between high and low.
3.2
Push-To-Talk Button
The Push-to-Talk (PTT) button serves two basic purposes:
• While a call is in progress, the PTT button allows
the radio to transmit to other radios in the call.
The microphone is activated when the PTT button is
pressed.
• While a call is not in progress, the PTT
button is used to
make a new call.
1
1: Push-to-Talk button
Long press the PTT button to talk. Release the PTT button
to listen.
If the Talk Permit Tone or the PTT Sidetone is enabled,
wait until the short alert tone ends before talking.
If the Channel Free Indication feature is enabled on your
radio (programmed by your dealer), you hear a short alert
tone the moment the target radio (the radio that is receiving
your call) releases the PTT button, indicating the channel is
free for you to respond.
English
24