User's Guide
Table Of Contents
- Documentation Copyrights
- Disclaimer
- Computer Software Copyrights
- Batteries, Chargers, and Audio Accessories Safety Information
- Operational Safety Guidelines
- Acoustic Safety
- FCC Licensing Information
- Supplier's Declaration of Conformity
- Class B Digital Device
- Radio Frequency Exposure Safety Standards
- Product Safety and RF Exposure Compliance.
- Notice to Users
- Introduction
- Radio Controls
- Installing the Batteries
- Charging the Battery
- Turning Your Radio On and Off
- Adjusting the Volume
- Reading the Display
- Talking and Receiving
- Basic Radio Operation
- Signal Strength and Channel Busy Indicators
- Talk Range
- Locking the Keypad
- Monitoring a Channel
- Programming Mode
- Entering Programming Mode
- Cloning Radio Settings
- Troubleshooting
Radio Controls
19
Turning Your Radio On and Off
See page 12 for a basic radio diagram.
Turn clockwise to turn the radio on, and counterclockwise to turn the radio off.
When the radio is on, the transmit light on the top of the radio blinks every 3 seconds.
When you turn the radio on, the radio chirps and the display briefly shows all features
and display segments.
The radio then displays the current channel (larger number in the
center) and the frequency assigned to that channel (on the right
indicated by ).
The Interference Eliminator Code displays briefly (indicated by ),
then the current channel remains displayed.
6880309S61-P.book Page 19 Wednesday, June 3, 2020 1:56 PM