User's Guide

Programming Mode
27
Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press until displays and the code
number blinks.
2. Press or
to select the code (see page 38).
3. Press and hold
Push to Talk to exit programming mode, or press
to continue programming.
Programming the Available Channels
If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press until displays and the
channel number blinks.
2. Press or
to select the number of channels you want
available.
3. Press and hold
Push to Talk to exit programming mode, or press
to continue programming.
Note:
The radio retains settings for channels made unavailable.
6864110w16r_EN-FR.book Page 27 Tuesday, June 23, 2020 3:30 PM