User's Guide

• The display shows Phone Call Failed and
then, Access Code:.
• Your radio returns to the screen you were on
prior to initiating the call if the access code has
been preconfigured in the Contacts list.
6 Press the PTT button to respond to the call.
The RSSI icon disappears.
7 Release the PTT button to listen.
8 Enter extra digits with the keypad if requested by the
call, and press to proceed.
If the call ends while you are entering the extra digits
requested by the call, your radio returns to the
screen you were on prior to initiating the call.
The DTMF Tone sounds. Your radio returns to the
previous screen.
9
Press
to end the call.
10 If the deaccess code was not preconfigured, enter
the deaccess code when the display shows De-
Access Code:, and press to proceed.
The radio returns to the previous screen. The DTMF
Tone sounds and the display shows Ending Phone
Call.
If the call ends successfully:
• A tone sounds.
• The display shows Call Ended.
If the call fails to end, the radio returns to the Phone
Call screen. Repeat step 9 and step 10, or wait for
the telephone user to end the call. When you press
the PTT button while in the Phone Contacts screen,
as tone sounds and the display shows Press OK to
Place Call.
When the telephone user ends the call, a tone
sounds and the display shows Phone Call Ended.
If the call ends while you are entering the extra digits
requested by the Phone Call, your radio returns to
the screen you were on prior to initiating the call.
English
93