User's Guide

4 To enter extra digits, if requested by the Phone Call.

Do one of the following:

• Press any keypad key to begin the input of the

extra digits. The display shows Extra Digits:

and a blinking cursor. Enter the extra digits and

press the button to proceed. The DTMF tone

sounds and the radio returns to the previous

screen.

• Press One Touch Access button. The DTMF

tone sounds. If the entry for the One Touch

Access button is empty, a negative indicator tone

sounds.

Press to end the call.

If deaccess code was not preconfigured in the

Contacts list, the display shows De-Access Code:.

Enter the deaccess code and press the

button

to proceed.

The DTMF tone sounds and the display shows

Ending Phone Call.

If the end-call-setup is successful, a tone sounds

and the display shows Call Ended.

If the end-call-setup is unsuccessful, your radio

returns to the Phone Call screen. Repeat step 3 and

step 5 or wait for the telephone user to end the call.

When you press PTT button while in the Phone

Contacts screen, a tone sounds and the display

shows Press OK to Place Call.

When the telephone user ends the call, a tone

sounds and the display shows Phone Call Ended.

If the call ends while you are entering the extra digits

requested by the Phone Call, your radio returns to

the screen you were on prior to initiating the call.

NOTICE:

During channel access, press to dismiss

the call attempt and a tone sounds.

During the call, when you press One Touch

Access button with the deaccess code

preconfigured or enter the deaccess code as

the input for extra digits, your radio attempts

to end the call.

English