User's Guide

4 Press the PTT button to make the call.

The green LED lights up. The display shows Phone

Call icon, subscriber alias, and call status.

If the call is successful:

• The DTMF Tone sounds.

• You hear the call waiting tone of the telephone

user.

• The display shows the subscriber alias and the

Phone Call icon.

If the call is unsuccessful:

• A tone sounds.

• The display shows Phone Call Failed and

then, Access Code:.

• If the access code has been preconfigured in the

Contacts list, your radio returns to the screen you

were on before initiating the call.

5 Press the PTT button to respond to the call.

6 Release the PTT button to listen.

7 Enter extra digits with the keypad if requested by the

call, and press to proceed.

If the call ends while you are entering the extra digits

requested by the call, your radio returns to the

screen you were on before initiating the call.

The DTMF Tone sounds. Your radio returns to the

previous screen.

Press to end the call.

9 Do one of the following:

• If the deaccess code was not preconfigured,

enter the deaccess code when the display shows

De-Access Code:, and press

to proceed.

The radio returns to the previous screen.

• Press the programmed One Touch Access

button. If the entry for the One Touch Access

button is empty, a negative indicator tone sounds.

The DTMF Tone sounds and the display shows

Ending Phone Call.

If the call ends successfully:

English