User's Guide

5.9.5
Phone Calls
A Phone Call is a call in between an individual radio or a
group of radios and a telephone.
Depending on how the radio is configured, the following
features may or may not be made available:
• Access code
• Dual Tone Multi Frequency (DTMF) tone
• De-access code
• Displaying of caller alias or ID on receiving a phone call
• Ability to reject or accept a phone call
The Phone Call capability can be enabled by assigning and
setting up phone numbers on the system. Check with your
system administrator to determine how your radio has been
programmed.
5.9.5.1
Making Phone Calls
Follow the procedure to make Phone Calls on your radio.
1 Do one of the following:
• Press the programmed Phone button to enter
into the Phone Entry list.
• Press the programmed One Touch Access
button. Proceed to step 2.
2
Press or to the required alias or ID.Press
to select.
When you press the PTT button while on the Phone
Contacts screen:
• A negative indicator tone sounds.
• The display shows Press OK to Place Phone
Call.
The display shows Access Code: if the access code
was not preconfigured.
3
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
English
88