User's Guide
Capacity Max supports Site All Call and Multi-site All Call.
The system administrator may configure one or both of
these in your radio.
NOTICE:
Subscribers can support System-Wide All Calls but
Motorola Solutions infrastructure does not support
System-Wide All Calls.
5.9.4.1
Receiving All Calls
When you receive an All Call, the following occur:
• A tone sounds.
• The green LED blinks.
• The display shows the Group Call icon at the top right
corner.
• The first text line shows the caller alias ID.
• The second text line displays either All Call, Site
All Call, or Multi Site Call depending on the type
of configuration.
• Your radio unmutes and the incoming call sounds
through the speaker.
The radio returns to the screen before receiving the All Call
when the call ends.
If the Channel Free Indication feature is enabled, you hear
a short alert tone when the transmitting radio releases the
PTT button, indicating the channel is free for you to use.
You cannot respond to an All Call.
NOTICE:
The radio stops receiving the All Call if you switch to
a different channel while receiving the call. You are
not able to continue with any menu navigation or
editing until the call ends during an All Call.
5.9.4.2
Making All Calls
Your radio must be programmed for you to make an All
Call.
1 Select a channel with the active All Call group alias
or ID. See Selecting a Call Type on page 67.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Group Call icon and either All Call, Site All
English
85