User's Guide

not available, a short tone sounds and the display show
Party Not Available.
1 Do one of the following:
• Select a channel with the active subscriber alias
or ID. See Selecting a Call Type on page 67.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Private Call icon, the subscriber alias, and call
status.
3 Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED lights up when the target radio
responds.
5 The call ends when there is no voice activity for a
predetermined period. You will hear a short tone.The
display shows Call Ended.
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing .
5.9.3.2
Making Private Calls by Using the
Programmable Number Key
Follow the procedure to make Private Calls on your radio
by using the programmable number key.
1 Long press the programmed number key to the
predefined alias or ID when you are on the Home
screen.
If a number key is assigned to an entry in a particular
mode, this feature is not supported when you long
press the number key in another mode.
A negative indicator tone sounds if the number key is
not associated to an entry.
2 Press the PTT button to make the call.
The green LED lights up. The display shows the
Private Call icon, subscriber ID or alias, and call
status.
English
79