User's Guide

• The green LED blinks.
• The first text line shows the caller alias.
• The second text line displays the group call alias.
• Your radio unmutes and the incoming call sounds
through the speaker.
NOTICE:
Recipient users are not allowed to Talkback during
a Broadcast Call. The display shows Talkback
Prohibit. The Talkback Prohibit Tone plays
momentarily if the PTT button is pressed during a
Broadcast Call.
5.9.3
Private Call
A Private Call is a call from an individual radio to another
individual radio.
There are two ways to set up a Private Call.
• The first call type is called Off Air Call Set-Up (OACSU).
OACSU sets up the call after performing a radio
presence check and completes the call automatically.
• The second type is called Full Off Air Call Set-Up
(FOACSU). FOACSU also sets up the call after
performing a radio presence check. However, FOACSU
calls require user acknowledgment to complete the call
and allows the user to either Accept or Decline the call.
The type of call is configured by the system administrator.
If the target radio is not available prior to setting up the
Private Call, the following occur:
• A tone sounds.
• The display shows a negative mini notice.
• The radio returns to the menu prior to initiating the radio
presence check.
NOTICE:
Both the call initiator and recipient are able to
terminate an on-going Private Call by pressing .
5.9.3.1
Making Private Calls
Your radio must be programmed for you to initiate a Private
Call. If this feature is not enabled, you hear a negative
indicator tone when you initiate the call. If the target radio is
English
78