User's Guide

2
Press or to Zone. Press to select.
The display shows and the current zone.
3 Enter the first character of the required alias.
The display shows a blinking cursor.
4 Enter the rest of the characters of the required alias.
The alias search is case-insensitive. If there are two
or more entries with the same name, the display
shows the entry listed first in the list.
The first text line shows the characters you entered.
The following text lines show the shortlisted search
results.
5
Press
to select.
The display shows <Zone> Selected momentarily
and returns to the selected zone screen.
5.8.3
Selecting a Call Type
Use the Channel Selector Knob to select a call type. This
can be a Group Call, Broadcast Call, All Call, or Private
Call, depending on how your radio is programmed. If you
change the Channel Selector Knob to a different position
(that has a call type assigned to it), this causes the radio to
re-register with the Capacity Max System. The radio
registers with the Talkgroup ID that has been programmed
for the new Channel Selector Knob position call type.
Your radio does not operate when selected to an
unprogrammed channel, use the Channel Selector Knob to
select a programmed channel instead.
English
67