User's Guide

Press or to WAVE. Press to select.

The yellow LED double blinks.

The display shows a momentary notice of Switching to

WAVE, then shows Preparing WAVE.

NOTICE:

Your radio automatically enables Wi-Fi after you

switch to WAVE mode.

If successful:

• The blinking yellow LED turns off.

• The display shows the WAVE connected icon,

<Talkgroup Alias>, and <Channel Index>.

If unsuccessful:

• A negative tone sounds.

• The red LED blinks.

• The display shows the WAVE disconnected icon and No

Connection or Activation: Fail, depending on the

error type.

NOTICE:

Synchronization occurs when new settings are

updated to your radio. When you enter the WAVE

mode, your radio displays Syncing.... When the

synchronization completes, your radio returns to the

home screen.

4.1.2

Making WAVE Group Calls

1 Use the channel selector knob or buttons to select a

WAVE talkgroup.

2 To call, press the PTT button.

If the call is successful, the display shows the Group Call

icon and the WAVE talkgroup alias.

If the call is unsuccessful:

• A negative indicator tone sounds.

• The display shows a momentary notice of Call Failed

or No Participants.

English