User's Guide

WAVE

Wide Area Voice Environment (WAVE

™

) provides a new

method of making calls between two or more radios.

WAVE allows you to communicate across different

networks and devices using Wi-Fi. WAVE calls are made

when the radio is connected to an IP network through Wi-

Fi.

Your radio supports different system configurations:

• WAVE OnCloud/OnPremise

• WAVE Tactical/5000

The method to initiate a WAVE Call is different for each

system type. Refer to the appropriate section depending on

the system configuration of your radio.

Table 2: WAVE Display Icons

The following icons appear momentarily on the display

when WAVE is enabled.

WAVE Connected

WAVE is connected.

WAVE Disconnected

WAVE is disconnected.

NOTICE:

This feature is applicable to specific models only.

4.1

WAVE OnCloud/OnPremise

4.1.1

Switching from Radio Mode to WAVE

Mode

1 Do one of the following:

• Press the programmed WAVE button. Skip the

following steps.

• Press

to access the menu.

English