User's Guide

2.4

Attaching the Belt Clip

1 To attach the belt clip, align the grooves on the clip

with those on the battery and press downward until

you hear a click.

2 To remove the belt clip, press the belt clip tab away

from the battery using a key. Then slide the clip

upward and away from the radio.

2.5

Attaching the Universal Connector

Cover

The universal connector is located on the antenna side of

the radio. It is used to connect MOTOTRBO accessories to

the radio.

Replace the universal connector cover or dust cover when

the universal connector is not in use.

1 Insert the slanted end of the cover into the slots

above the universal connector.

2 Press downwards on the cover to seat the dust

cover properly on the universal connector.

English