User's Guide

Getting Started
Getting Started provides instructions to prepare your radio
for use.
2.1
Charging the Battery
For best performance, your radio is powered by a Motorola
Solutions-approved Lithium-Ion (Li-lon) battery.
• Charge your battery only in non-hazardous areas.
After battery is charged, allow your radio to rest for
at least 3 minutes.
• To avoid damage and comply with warranty terms,
charge the battery using a Motorola Solutios charger
exactly as described in the charger user guide.
• Charge your battery only in non-hazardous areas.
After battery is charged, allow your radio to rest for
at least 3 minutes.
• If battery is attached to your radio, ensure that your
radio remains powered off while charging.
• Charge a new battery 14 to 16 hours before initial
use for best performance.
• Always charge your IMPRES battery with an
IMPRES charger for optimized battery life and
valuable battery data.
IMPRES batteries charged exclusively with IMPRES
chargers receive a 6-month capacity warranty
extension over the standard Motorola Solutions
Premium battery warranty duration.
2.2
Attaching the Battery
Follow the procedure to attach the battery to your radio.
NOTICE:
Do not replace battery in combustible gas and dust
environments. Replace battery only in
non-hazardous areas.
The certification of the radio is voided if you attach a
non-CSA battery to the radio. This battery mismatch alert
feature is only applicable for IMPRES battery and
Non-IMPRES battery with kit number programmed in
Erasable Programmable Read Only Memory (EPROM).
When the radio is attached with the wrong battery, a low
pitched warning tone sounds, the LED lights up blinking
red, display shows Wrong Battery and the Voice
Announcement/Text-to-Speech sounds Wrong Battery if
English
39