User's Guide

6.10.18
Turning Backlight Auto On or Off
You can enable and disable the backlight of the radio to
turn on automatically as needed. If enabled, the backlight is
turned on when the radio receives a call, Notification List
event, or Emergency Alarm.
1
Press to access the menu.
2
Press
or to Utilities. Press to select.
3
Press or to Radio Settings. Press to
select.
4
Press or to Backlight Auto.
5
Press to enable or disable Backlight Auto.
The display shows one of the following results:
• If enabled, appears beside Enabled.
• If disabled,
disappears beside Enabled.
6.10.19
Squelch Levels
You can adjust the squelch level to filter out unwanted calls
with low signal strength or channels with noise higher than
normal background.
Normal
This is the default setting.
Tight
This setting filters out unwanted calls and/or
background noise. Calls from remote locations may also
be filtered out.
NOTICE:
This feature is not applicable in Citizens Band
channels that are in the same frequency.
6.10.19.1
Setting Squelch Levels
Follow the procedure to set the squelch levels on your
radio.
English
383