User's Guide

For a non-connected network access point, your radio
displays SSID, Security Mode, Identity, EAP Method,
Phase 2 Authentication, and Cert Name.
6.9.29.9
Removing Network Access Points
NOTICE:
This task is not applicable to Enterprise Wi-Fi
networks.
Perform the following actions to remove network access
points from the profile list.
1
Press to access the menu.
2
Press or to WiFi and press to select.
3
Press or to Networks and press to
select.
4
Press or to the selected network access
point and press to select.
5
Press or to Remove and press to select.
6
Press or to Yes and press to select.
The radio displays a positive mini notice to indicate
that the selected network access point is
successfully removed.
6.9.30
Front Panel Programming
You are able to customize certain feature parameters in
Front Panel Programming (FPP) to enhance the use of
your radio.
The following buttons are used as required while navigating
through the feature parameters.
Up/Down/Left/Right Navigation Button
Press to navigate through options horizontally or
vertically, or increase or decrease values.
English
366