User's Guide

6.9.29
Wi-Fi Operation
This feature allows you to set up and connect to a Wi-Fi
network. Wi-Fi supports updates for radio firmware,
codeplug, and resources such as language packs and
voice announcement.
NOTICE:
This feature is applicable to XPR 7580e IS only.
Wi-Fi
®
is a registered trademark of Wi-Fi Alliance
®
.
Your radio supports WEP/WPA/WPA2-Personal and WPA/
WPA2-Enterprise Wi-Fi networks.
WEP/WPA/WPA2-Personal Wi-Fi network
Uses pre-shared key (password) based authentication.
Pre-shared key can be entered by using the menu or
CPS/RM.
WPA/WPA2-Enterprise Wi-Fi network
Uses certificate-based authentication.
Your radio must be pre-configured with a certificate.
NOTICE:
Check with your dealer or system administrator
to connect to WPA/WPA2-Enterprise Wi-Fi
network.
The programmed Wi-Fi On or Off button is assigned by
default. Check with your dealer or system administrator to
determine how your radio has been programmed.
Voice Announcements for the programmed Wi-Fi On or
Off button can be customized through CPS according to
user requirements. Check with your dealer or system
administrator for more information.
NOTICE:
You can turn on or turn off Wi-Fi remotely by using a
designated radio (see Turning Wi-Fi On or Off
Remotely by Using a Designated Radio (Individual
Control) on page 191 and Turning Wi-Fi On or Off
Remotely by Using a Designated Radio (Group
Control) on page 192). Check with your dealer or
system administrator for more information.
6.9.29.1
Turning Wi-Fi On or Off
1 Press the programmed Wi-Fi On or Off button.
Voice Announcement sounds Turning On Wi-Fi or
Turning Off Wi-Fi.
2 Access this feature using the menu.
English
359