User's Guide

• Press the programmed Emergency On button
during an emergency initiation or transmission
state.
The radio exits the Emergency mode, and reinitiates
Emergency.
6.9.20
Man Down
This feature prompts an emergency to be raised if there is
a change in the motion of the radio, such as the tilt of the
radio, motion and/or the lack of motion for a predefined
time.
Following a change in the motion of the radio for a
programmed duration, the radio pre-warns the user with an
audio indicator indicating that a change in motion is
detected.
If there is still no acknowledgment by the user before the
predefined reminder timer expires, the radio initiates an
Emergency Alarm or an Emergency Call. You can program
the reminder timer by using CPS.
6.9.20.1
Turning the Man Down Feature On or
Off
NOTICE:
The programmed Man Down button and Man Down
settings are configured using CPS. Check with your
dealer or system administrator to determine how
your radio has been programmed.
If you disable the Man Down feature, the programmed alert
tone sounds repeatedly until the Man Down feature is
enabled. A device failure tone sounds when the Man Down
feature fails while powering up. The device failure tone
continues until the radio resumes normal operation.
You can enable or disable this feature by performing one of
the following actions.
• Press the programmed Man Down button to toggle
the feature on or off.
• Access this feature using the menu.
a. Press
to access the menu.
b. Press or to Utilities. Press to
select.
English
333