User's Guide

NOTICE:
Some accessories may not support hot mic. Check
with your dealer or system administrator for more
information.
6.9.19.6
Sending Emergency Alarms with Voice
to Follow
1 Press the programmed Emergency On button.
You see one of these results:
• The display shows Tx Alarm and the destination
alias.
The green LED lights up. The Emergency icon
appears.
2
Once the display shows Alarm Sent, speak clearly
into the microphone.
The radio automatically stops transmitting when:
• The cycling duration between hot mic and
receiving calls expires, if Emergency Cycle Mode
is enabled.
• The hot mic duration expires, if Emergency Cycle
Mode is disabled.
3 Press the Emergency Off button to exit the
Emergency mode.
The radio returns to the Home screen.
6.9.19.7
Reinitiating Emergency Mode
Perform one of the following actions:
• Change the channel while the radio is in
Emergency mode.
NOTICE:
You can reinitiate emergency mode only if
you enable emergency alarm on the new
channel.
English
332