User's Guide
5
Press or to Edit Priority. Press to
select.
6
Press or to the required priority level. Press
to select.
The display shows a positive mini notice before
returning to the previous screen. The Priority icon
appears on the left of the member alias.
6.9.11
Scan
Your radio cycles through the programmed scan list for the
current channel looking for voice activity when you start a
scan.
NOTICE:
This feature is not applicable in Capacity Plus.
During a dual-mode scan, if you are on a digital channel,
and your radio locks onto an analog channel, it
automatically switches from digital mode to analog mode
for the duration of the call. This is also true for the reverse.
There are two ways of initiating scan:
Main Channel Scan (Manual)
Your radio scans all the channels or groups in your
scan list. On entering scan, your radio may, depending
on the settings, automatically start on the last scanned
active channel or group, or on the channel where scan
was initiated.
Auto Scan (Automatic)
Your radio automatically starts scanning when you
select a channel or group that has Auto Scan enabled.
NOTICE:
When you configure Receive Group Message In
Scan, your radio is able to receive group messages
from non-home channels. Your radio is able to reply
the group messages on home channel but is not
able to reply on non-home channels. Check with
your dealer or system administrator for more
information.
6.9.11.1
Turning Scan On or Off
Follow the procedure to turn scan on or off on your radio.
English
305