User's Guide

Press or to Radio Check. Press to

select.

The display shows a transitional mini notice,

indicating the request is in progress. The green LED

lights up.

5 Wait for acknowledgment.

If you press when the radio is waiting for

acknowledgement, a tone sounds, the radio

terminates all retries, and exits Radio Check mode.

If successful:

• A positive indicator tone sounds.

• The display shows a positive mini notice.

If unsuccessful:

• A negative indicator tone sounds.

• The display shows a negative mini notice.

The radio returns to the subscriber alias or ID

screen.

6.9.9

Remote Monitor

This feature is used to turn on the microphone of a target

radio with a subscriber alias or ID. You can use this feature

to remotely monitor any audible activity surrounding the

target radio.

Both your radio and the target radio must be programmed

to allow you to use this feature.

This feature stops after a programmed duration or when

there is any user operation on the target radio.

6.9.9.1

Initiating Remote Monitor

Follow the procedure to initiate Remote Monitor on your

radio.

1 Press the programmed Remote Monitor button.

Press

or to the required alias or ID.

English

298