User's Guide

1 Long press the programmed Monitor button.
The Monitor icon appears on the display and the
LED lights up solid yellow.
If the channel is in use:
• The display shows the Monitor icon.
• You hear radio activity or total silence.
• The yellow LED lights up.
If the monitored channel is free, you hear a “white
noise".
2 Press the PTT button to talk. Release the PTT
button to listen.
6.9.7.2
Permanent Monitor
The Permanent Monitor feature is used to continuously
monitor a selected channel for activity.
6.9.7.2.1
Turning Permanent Monitor On or Off
Follow the procedure to turn Permanent Monitor on or off
on your radio.
Press the programmed Permanent Monitor button.
When the radio enters the mode:
• An alert tone sounds.
• The yellow LED lights up.
•
The display shows Permanent Monitor On and
the Monitor icon.
When the radio exits the mode:
• An alert tone sounds.
• The yellow LED turns off.
• The display shows Permanent Monitor Off.
6.9.8
Radio Check
This feature allows you to determine if another radio is
active in a system without disturbing the radio user. No
audible or visual notification is shown on the target radio.
English
296