User's Guide
6.9.4
Multi-Site Control
Your radio is able to search for sites and switch between
sites when signal is weak or your radio is unable to detect
any signal from the current site.
When the signal is strong, the radio remains on the current
site.
This setting is applicable when your current radio channel
is part of an IP Site Connect or Capacity Plus–Multi-Site
configuration.
Your radio can perform either one of the following site
searches:
• Automatic Site Search
• Manual Site Search
If the current channel is a multi-site channel with an
attached roam list and is out of range, and the site is
unlocked, your radio also performs automatic site search.
6.9.4.1
Starting Automatic Site Search
1 Do one of the following:
• Press the programmed Site Lock On/Off button.
Skip the following steps.
• Press
to access the menu.
2
Press or to Utilities.Press to select.
3
Press or to Radio Settings.Press to
select.
4
Press
or to Site Roaming. Press to
select.
5
Press or to Unlock Site. Press to
select.
• A tone sounds.
• The display shows Site Unlocked.
English
286