User's Guide

At the fringe areas of reception, both voice and tone quality
start to sound "garbled" or "broken". To correct this
problem, position your radio and Bluetooth-enabled device
closer to each other (within the 10 m defined range) to re-
establish clear audio reception. The Bluetooth function of
your radio has maximum power of 2.5 mW (4 dBm) at the
10 m range.
Your radio can support up to three simultaneous Bluetooth
connections with Bluetooth-enabled devices of unique
types. For example, a headset, a scanner, a sensor device,
and a PTT-Only Device (POD). Multiple connections with
Bluetooth-enabled devices of the same type are not
supported.
Refer to the user manual of your respective Bluetooth-
enabled device for more details on the full capabilities of
your Bluetooth-enabled device.
Your radio connects to the Bluetooth-enabled device within
range with either the strongest signal strength, or to one
which it has connected to before in a prior session. Do not
turn off your Bluetooth-enabled device or press the home
back button during the finding and connecting
operation as this cancels the operation.
6.9.1.1
Turning Bluetooth On and Off
Follow the procedure to turn Bluetooth on and off.
1
Press to access the menu.
2
Press or to Bluetooth. Press to select.
3
Press or to My Status. Press to select.
The display shows On and Off. The current status is
indicated by a .
4 Do one of the following:
• Press
or to On. Press to select. The
display shows beside On.
• Press or to Off. Press to select.
The display shows beside Off.
This feature is applicable to XPR 7580e IS only.
English
271