User's Guide

9 Release the PTT button to listen.

10 Enter extra digits with the keypad if requested by the

call, and press to proceed.

If the call ends while you are entering the extra digits

requested by the call, your radio returns to the

screen you were on before initiating the call.

The DTMF Tone sounds. Your radio returns to the

previous screen.

Press

to end the call.

12 Do one of the following:

• If the deaccess code was not preconfigured,

enter the deaccess code when the display shows

De-Access Code:, and press to proceed.

The radio returns to the previous screen.

• Press the programmed One Touch Access

button.

If the entry for the One Touch Access button is

empty, a negative indicator tone sounds.

The DTMF Tone sounds and the display shows

Ending Phone Call.

If the call ends successfully:

• A tone sounds.

• The display shows Call Ended.

If the call fails to end, the radio returns to the Phone

Call screen. Repeat step 11, or wait for the

telephone user to end the call.

6.8.6

Initiating Transmit Interrupt

An ongoing call is interrupted, when you perform the

following actions:

• Press the Voice PTT button.

• Press the Emergency button.

• Perform data transmission.

English

263