User's Guide

1
Press to access the menu.
2
Press or to Contacts. Press to select.
3
Press or to Manual Dial. Press to
select.
4
Press or to Phone Number. Press to
select.
The display shows Number: and a blinking cursor.
5
Enter the telephone number, and press
to
proceed.
The display shows Access Code: and a blinking
cursor if the access code was not preconfigured.
6
Enter the access code, and press to proceed.
The access or deaccess code cannot be more than
10 characters.
7
The green LED lights up. The display shows the
Phone Call icon at the top right corner. The first text
line shows the subscriber alias. The second text line
shows the call status.
If the call is successful:
• The DTMF Tone sounds.
• You hear the dialing tone of the telephone user.
• The first text line shows the subscriber alias.
• The display continues to show the Phone Call
icon at the top right corner.
If the call is unsuccessful:
• A tone sounds.
• The display shows Phone Call Failed and
then, Access Code:.
• Your radio returns to the screen you were on
before initiating the call if the access code has
been preconfigured in the Contacts list.
8 Press the PTT button to respond to the call.
English
262