User's Guide

6.8.5.7
Making Phone Calls with the
Programmable Phone Button
Follow the procedure to make a phone call with the
programmable phone button.
1 Press the programmed Phone button to enter into
the Phone Entry list.
2
Press or to the required alias or ID. Press
to select. If the access code was not
preconfigured in the Contacts list, the display shows
Access Code:. Enter the access code and press the
button to proceed.
• The green LED lights up. The Phone Call icon
appears in the top right corner. The first text line
shows the subscriber alias. The second text line
displays the call status.
• If the call-setup is successful, the Dual Tone Multi
Frequency (DTMF) tone sounds. You hear the
dialing tone of the telephone user. The first text
line shows the subscriber alias. The Phone Call
icon remains in the top right corner. The second
text line displays the call status.
• If call-setup is unsuccessful, a tone sounds and
the display shows Phone Call Failed. Your
radio returns to the Access Code input screen. If
the access code was preconfigured in the
Contacts list, the radio returns to the screen you
were on prior to initiating the call.
3 Press the PTT button to talk. Release the PTT
button to listen.
4 To enter extra digits, if requested by the Phone Call:
Do one of the following:
• Press any keypad key to begin the input of the
extra digits. The first line of the display shows
Extra Digits:. The second line of the display
shows a blinking cursor. Enter the extra digits
and press the button to proceed. The Dual
Tone Multi Frequency (DTMF) tone sounds and
the radio returns to the previous screen.
• Press One Touch Access button. The Dual Tone
Multi Frequency (DTMF) tone sounds. If the entry
English
260