User's Guide

The call ends when there is no voice activity for a
predetermined period. The radio returns to the
screen you were on before initiating the call.
See Assigning Entries to Programmable Number Keys on
page 310 for more information.
6.8.1.5
Making Group Calls by Using the
Channel Selector Knob
Follow the procedure to make Group Calls by using the
Channel Selector Knob.
1 Do one of the following:
• Select a channel with the active group alias or ID.
• Press the programmed One Touch Access
button.
2 Press the PTT button to make the call.
The green LED lights up.The display shows the
Group Call icon and alias.
3 Do one of the following:
• Wait for the Talk Permit Tone to end and speak
clearly into the microphone if enabled.
• Wait for the PTT Sidetone to end and speak
clearly into the microphone if enabled.
4 Release the PTT button to listen.
The green LED blinks when the target radio
responds. The display shows the Group Call icon,
and alias or ID, and the transmitting radio alias or ID.
The radio returns to the screen you were on prior to
initiating the call.
5
If the Channel Free Indication feature is enabled,
you hear a short alert tone the moment the
transmitting radio releases the PTT button, indicating
the channel is free for you to respond. Press the PTT
button to respond to the call.
The call ends when there is no voice activity for a
predetermined period.
A tone sounds.
English
243