User's Guide

5.11.23
Switching Audio Route between
Internal Radio Speaker and Wired
Accessory
Follow the procedure to toggle audio routing between
internal radio speaker and wired accessory.
You can toggle audio routing between the internal radio
speaker and the speaker of a wired accessory with the
condition that:
• The wired accessory with speaker is attached.
Press the programmed Audio Toggle button.
A tone sounds when the audio route has switched.
Powering down the radio or detaching the accessory resets
the audio routing to the internal radio speaker.
5.11.24
Turning Intelligent Audio On or Off
Your radio automatically adjusts the audio volume to
overcome current background noise in the environment,
inclusive of both stationary and non-stationary noise
sources. This is a receive-only feature and does not affect
transmission audio. Follow the procedure to turn Intelligent
Audio on or off on your radio.
NOTICE:
This feature is not applicable during a Bluetooth
session.
1 Do one of the following:
• Press the programmed Intelligent Audio button.
Skip the steps below.
• Press to access the menu.
2
Press
or to Utilities. Press to select.
3
Press or to Radio Settings. Press to
select.
4
Press or to Intelligent Audio. Press
to select.
English
215