User's Guide

• The display shows the Emergency Call icon, the
Emergency Talkgroup ID or alias, and the ID or
alias of the transmitting radio.
NOTICE:
If the Emergency Call Indication is not
enabled, the display shows the Group Call
icon, Emergency Talkgroup ID or alias, and
the ID or alias of the transmitting radio.
5.10.20.7
Exiting Emergency Mode
Press the programmed Emergency Off button.
Your radio shows the following indications:
• The tone ceased.
• The red LED extinguished.
• When acknowlegment is received, the display of the
transmitting radio shows Cancel Emer Success. If no
acknowledgement is received, the display shows
Cancel Emer Failed.
NOTICE:
If the Cancel Emergency configuration is
enabled on the transmitting radio, the emergency
alarm in your receiving radio will cease and the
status is added to the Alarm List of the receiving
radio.
5.10.21
Status Message
This feature allows the user to send status messages to
other radios.
The Quick Status list is configured by using CPS-RM and
comprises up to a maximum of 99 statuses.
The maximum length for each status message is 16
characters.
NOTICE:
Every status has a corresponding digital value
ranging from 0–99. An alias can be specified to
each status for ease of reference.
5.10.21.1
Sending Status Messages
Follow the procedure below to send a status message.
English
153