User's Guide

Follow the procedure to send Emergency Alarms with voice

to follow on your radio.

1 Press the programmed Emergency On button.

You see one of these results:

• The display shows Tx Alarm and the destination

alias.

• The display shows Tx Telegram and the

destination alias.

The green LED lights up. The Emergency icon

appears.

Once the display shows Alarm Sent, speak clearly

into the microphone.

The radio automatically stops transmitting when:

• The cycling duration between hot mic and

receiving calls expires, if Emergency Cycle Mode

is enabled.

• The hot mic duration expires, if Emergency Cycle

Mode is disabled.

3 Press the Emergency Off button to exit the

Emergency mode.

The radio returns to the Home screen.

5.10.20.4

Receiving Emergency Alarms

The receiving radio can only support a single Emergency

Alarm at a time. If initiated, a second Emergency Alarm will

override the first alarm. Follow the procedure to receive

and view Emergency Alarms on your radio.

When you receive an Emergency Alarm:

• A tone sounds.

• The red LED blinks.

• The display shows the Emergency Alarm List, the

Emergency Talkgroup ID or alias, and the ID or alias of

the transmitting radio.

Press

to view the alarm.

English

150